vor 2 Monaten


  • Text
  • Bioplastics
  • Materials
  • Talc
  • Injection
  • Biobased
  • Moulding
  • Plastics
  • Renewable
  • Products
  • Properties


Microplastic Microplastics in the Environment Sources, Consequences, Solutions total mass in million tonnes 350 300 250 200 150 100 1950 1970 1990 2010 Global plastic production Ingress of plastic waste into the oceans estimations by: UNEP 2006 Wright et al. 2013 Plastic waste in the oceans Diameter Typical dimensions of aquatic creatures Macroplastic > 25 mm Fish, shellfish, mussels, etc. Typical dimensions of industrial plastics Mesoplastic 5 – 25 mm production of plastic granules /pellets Large microplastic particle Small microplastic particle 1 – 5 mm < 1mm Plankton Application of microplastic in cosmetics Tabelle 1 50 0 Table 1: Classification of marine plastic debris on the basis of size (Source: own representation based on JRC 2013, STAP 2011) Figure 1: Global plastics production in the period from 1950 to 2012 und estimated volume of discharge of plastics into the oceans (Source: own representation based on PlasticsEurope 2013, UNEP 2006, Wright et al. 2013) Scientific studies have shown that plastics make a huge contribution to the littering of the seas. In marine pro- tection, plastic particles with a diameter of less than 5 mm are referred to as microplastics. These can be fragments created by the breaking up of larger pieces of plastic such as packaging, or as fibres are washed out of textiles. They can also be primary plastic particles, produced in microscopic sizes. These include granulates used in cosmetics, washing powders, cleaning agents and in other applications. The following article describes the source of microplastics, the effects they have on the ecosystem and on people, and discusses potential solutions. For the first time, on July 1st 2014, a conference will be dedicated to this topic in Germany. Waste in the oceans and inland waters is dominated by plastics (Barnes et al. 2009). The United Nations Environment Programme (UNEP) assumes coverage of up to 18,000 pieces of plastic for every square kilometre of ocean (UNEP 2006). It can take centuries for plastic to be broken down in the oceans by physical, chemical, and biological decomposition processes (UBA 2010). Along with larger waste items such as plastic bottles or bags, steadily increasing amounts of plastic microparticles – commonly known as microplastics s – are being observed in ocean gyres, sediments, and on beaches, as well as being found in marine organisms. The term microplastics, however, is not used consistently. In the cosmetics industry, it is used to describe plastic granulates that in many cases are much smaller than 1 mm in diameter. In marine protection, in contrast, plastic particles with a diameter of less than 5 mm are considered microplastics (Arthur et al. 2009). On the other hand, Browne et al. (2011) use the term for plastic particles with a diameter of less than 1mm. Neither source gives a lower value for the diameter of particles, meaning that the term microplastics also includes significantly smaller particles (Leslie et al. 2011). Microplasticss can therefore be considered an umbrella term for various plastic particles determined solely on the basis of size (cf. Table 1). In accordance with this definition, in the text that follows, all plastic particles with a diameter smaller than 5mm are termed microplastics. 46 bioplastics MAGAZINE [02/14] Vol. 9

Microplastic Sources of microplastics The most commonly used polymers in cosmetics are polyethylene (PE), polypropylene (PP) and polyamide (PA). A whole series of other polymers are also in use (Leslie et al. 2012). Manufacturers add synthetic polymers to cosmetics for a number of reasons: some possess film-forming and viscosityregulating properties, others act as abrasives. They are designed to remove impurities from the skin or to clean teeth. Along with their use in the cosmetics industry, there are other applications for plastic microparticles. They are used as abrasive beads in detergents and cleaning fluids, and as a blasting abrasive in, for example, the surface cleaning of stainless steel. They are use as lubricants, separating agents, or as carriers for pigments, or to adjust the viscosity of hot melt adhesives. Water softeners can also contain plastic microparticles. As well as microplastics produced directly in microscopic sizes to be used in cosmetics and other products, microparticles in many cases are secondary fragments produced by the breakdown of larger pieces of plastic. Plastic microparticles can originate, for example, from plastic packaging dumped in the environment, such as bags or boxes, or from plastic fibres from textiles, or particles released by tyre wear. The production and recycling of plastics also generates particles. Ryan et al. (2010) also record direct macroplastic pollution from ship waste. Although the sources of microplastics are largely documented, until now no reliable data has been produced on the amounts of microplastics from cosmetics and other implementations, and other sources, actually enter the environment. The United Nations Environment Programme refers to the estimate made in 1997 that in the 1990s, around 6.4 million tonnes of plastic debris entered the oceans annually, of which just short of 5.6 million tonnes came from shipping (UNEP 2006). Wright et al. 2013 estimate that, in total, around ten per cent of global plastics production will find its way into the ocean at some point. It follows that of the 288 million tonnes of plastic produced worldwide in 2012 (according to PlasticsEurope estimates), just short of 30 million tonnes will sooner or later enter the marine environment and serve as a potential source of microplastics (cf. Figure 1). Consequences of microplastics The presence of microplastics in the environment has a number of negative consequences for humans and the natural environment. If animals ingest pieces of plastic, large or small, mistaking them for food, a permanent feeling of satiety can result – and they starve to death. In experiments feeding mussels with microplastics, researchers demonstrated that plastic particles could penetrate the stomach lining and enter the bloodstream. Many plastic parts contain chemicals like softeners or flame retardants. Some of these additives are harmful to fertility or imitate natural hormones. They are only weakly bound into the plastic matrix, and can easily leach out and impact plant and animal life. Long-lasting hydrophobic pollutants can attach to and accumulate on plastic microparticles. If marine organisms consume these particles, these contaminants can enter the food chain (Teuten et al. 2007) and ultimately cause harm to humans. Can bioplastics be a solution? Primary microparticles from cosmetics make up only a small part of the plastics in the oceans in absolute terms. Strategies designed to reduce the ever-increasing littering of the world’s seas should therefore not focus solely on the use of these microparticles, but should apply to all kinds of plastic waste. Cosmetics manufacturers can, however, eliminate longlasting plastic microparticles from their products, or replace them with microparticles produced from other materials. Many of these companies are currently on the lookout for alternatives. Chemicals producers and traders already offer a selection (cellulose, wood chip, minerals). Whether or not biodegradable polymers can be an option is an exciting and important question. Their use would be of interest above all because the existing production chain could be kept in use largely unaltered, and the functioning of the microparticles would also be a very close match for the plastics previously in use. Polyhydroxyalkanoates (PHA), and polybutylene succinate (PBS), are potential candidates, as are polylactic acid (PLA) produced from maize starch, chitosan from chitin or casein from animal protein. Current studies suggest that PLA is probably not the best solution, whereas PHAs have real future potential (CalRecycle 2012). PHAs are natural thermoplastics, which degrade quickly in almost any environment (including in the sea). The greatest challenges lie in ensuring that breakdown occurs only after the product has been used, and in developing mass production. In contrast, so-called oxo-(bio)degradable e plastics are no solution – in fact, they’re part of the problem. These plastics aren’t actually biodegradable. They contain predetermined breaking points that cause the polymers to fragment i.e. produce microparticles. Up to 80 % of the content (in terms of the original weight of the product) remains in the environment and can produce toxic effects (Narayan 2009). Conclusions The availability of precise numbers on the amount of plastic microparticles used in cosmetics and other products is unsatisfactory. Due to the lack of data, it is difficult to establish the volumes in which these particles enter the environment, and what the predominant transport and release mechanisms are. Their accumulation in the oceans, on the seafloor, on beaches worldwide, and in numerous organisms (and the resulting adverse effects for both humans and nature) is receiving ever more public attention, and demands solutions. Fragments from plastic debris that has entered the sea are a far greater source of damage. This means that if we want to decrease the amount of microplastics in the environment, and above all in the world’s oceans, it is not enough to focus on microplastics in cosmetics. Instead, measures need to bioplastics MAGAZINE [04/14] Vol. 9 47

bioplastics MAGAZINE ePaper